TYN-M - Multimode modular hybrid solar inverter - Biến tần năng lượng mặt trời - Baykee Việt Nam

Model

TYN-M-20K-M20

TYN-M-60K-M20

TYN-M-120K-M20

TYN-M-200K-M20

Rated output capacity

20KW

60KW

120KW

200KW

Working mode

solar, AC Hybrid storage inverter

Working turn

Solar——Mains——Battery

Isolation type

Non-isolated high frequency

Power module model

TYN-M-20K-PM

Number of power modules can be configured

1pcs

1~3pcs

1~6pcs

1~10pcs

Solar

Max input capacity

10KW×2

10KW×6

10KW×12

10KW×20

Rated operating voltage

500V

Max input voltage

800V

MPPT range

400~800V

Max input current

25A×2

Input line

2

6

12

20

gird (converter)

Rated operating  voltage

L-L:380/400/415 Vac, L-N:220/230/240 Vac 3Phase 4Wire（or single phase 2 wire) + PE

Rated operating frequency

50/60Hz

 input voltage range

±25%,-40%(half load )

 input frequency  range

±10%

Input power factor

≥0.95(20~50% load )≥0.99 (100%load)

Current harmonic(2~39times )

≤5%(50%load)≤3%(100%load)

Max input capacity

30KW

90KW

180KW

300KW

Max output capacity

20KW

60KW

120KW

200KW

Max input current

45A

135A

270A

450A

Grid-connected DC component of current

≤0.5% current rated value

Island protection time

2s

Generator mode

have

Output (inverter)

Rated working voltage

L-L:380/400/415 VAC, L-N:220/230/240 VAC 3Phase 4Wire(or single phase 2 wire) + PE

Rated working frequency

50/60Hz±0.5Hz

Output voltage stabilization accuracy

≤±1%

Frequency tracking rate

0.2Hz/s～2Hz/s

Waveform distortion

Sine wave, distortion: ≤3% (liner load ) ≤5% (non-liner load)

Output DC component

≤1%

Three-phase voltage phase deviation

2º

Dynamic transient characteristics

The dynamic transient range of inverter output is less than 10%, and the transient recovery time is <20mS

Crest factor

3:1

Overload capacity

105% overload delay 10 minutes protection, 125% overload delay 1 minute, more than 150% protection immediately

Working system

Three in and three out, three in and three out, single in and single out, single in and three out(optional)

Working mode

On and off grid,off grid(optional)

Parallel machine no-load circulation

≤5%

Parallel machine current imbalance

≤5%

Self aging function

25%,50%,75%,100%(optional)

Battery

Rated voltage

240V(192V~288V Can be adjusted)

Max current

120A

360A

720A

1200A

Battery type

Lead-acid batteries, lithium batteries (or similar batteries)

Battery capacity

configurable

Charging mode

Temperature compensated constant current, constant pressure(Three-stage @ lead-acid battery)

Float charging voltage

2.25V±1% /cell (@25℃, lead-acid battery)

equal charging voltage

2.34V±1% /cell (@25℃, lead-acid battery)

Temperature compensation

-3mV/℃/cell (@ lead-acid battery) 

Maximum charging capacity

≤50%(can be set ), Expandable external isolation charger

System parameters

Switching time

0ms

Inverter efficiency

≥95%

Protection function

Battery reverse connection protection, PV reverse connection protection, output short circuit, overload, over voltage, phase sequence, over temperature, fan fault, etc

cooling way

Temperature controlled air cooling

Protection grade

IP20

Running environment

temperature-20~50℃

Relative humidity

30%～95%(No condensation)

Running height (maximum)

<1000 meters (1% drop in capacity per 100 meters, up to 4000 meters)

Installation method

Based on customer’s requirements and the project site condition

Size W*D*H(mm)

800*200*1000

600*800*1200

600*800*1800

600*800*2200