iologik-e1214-bo-chuyen-mach-i-o-tu-xa-6-di-6-relays-2-cong-ethernet-thiet-bi-smart-io-cong-nghiep-moxa-viet-nam-moxa-stc-viet-nam.png

ioLogik E1214: Bộ chuyển mạch I/O từ xa 6 DI, 6 Relays, 2 cổng Ethernet, Thiết bị Smart IO công nghiệp Moxa Việt Nam, Moxa-STC Việt Nam

Xuất sứ: Taiwan

Nhà cung cấp: STC Việt Nam

Hãng sản xuất: MOXA VIỆT NAM

Ứng dụng sản phẩm: Thiết bị Smart I/O

Liên hệ tư vấn

Mr Duy

duy@songthanhcong.com

0918.364.352

live:thanhduystc

Đại Diện Ủy Quyền Moxa Tại Việt Nam

Giới thiệu:

ioLogik E1214 Bộ chuyển mạch I/O từ xa 6 DI, 6 Relays 2 cổng Ethernet  của hãng Moxa-Taiwan được Moxa Việt Nam phân phối rộng rãi tại thị trường Việt Nam. ioLogik E1214 được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh,…

Tính năng của sản phẩm :

  • User-definable Modbus/TCP Slave addressing
  • Supports EtherNet/IP* adapter mode
  • Supports RESTful API for IIoT applications
  • 2-port Ethernet switch for daisy-chain topologies
  • Save time and wiring cost with peer-to-peer communications
  • Active communications with MX-AOPC UA Server
  • Supports SNMPv1/v2c
  • Easy mass deployment and configuration with ioSearch utility
  • Friendly configuration via web browser
  • Simplify I/O management with MXIO library on either a Windows or Linux platform
  • Class I Division 2, ATEX Zone 2 certification
  • Wide operating temperature range: -40 to 75°C (-40 to 167°F) 
Standards and Certifications
  • Safety UL 508
  • EMC EN 55032, EN 55024, EN 61000-3-2/3-3, EN 61000-6-2/6-4
  • EMI CISPR 32, FCC Part 15B Class A
  • EMS 
    • IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
    • IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
    • IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
    • IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
    • IEC 61000-4-6 CS: 10 V
    • IEC 61000-4-8
  • Hazardous Location Class 1 Division 2, ATEX Zone 2
  • Green Product RoHS, CRoHS, WEEE
Thông số kỹ thuật của sản phẩm :
 
• Inputs and Outputs
Digital Inputs 6 channels
Relays 6 channels
Isolation 3k VDC or 2k Vrms
• Digital Input
Sensor Type Wet Contact (NPN or PNP), Dry Contact
I/O Mode DI or Event Counter
Dry Contact • On: short to GND
• Off: open
Wet Contact (DI to COM) • On: 10 to 30 VDC 
• Off: 0 to 3 VDC
Common Type 6 points per COM
Counter Frequency 250 Hz
Digital Filtering Time Interval Software configurable
• Relay
Note Ambient humidity must be non-condensing and remain between 5 and 95%. The relays of the ioLogik E1214 may malfunction when operating in high condensation environments below 0°C.
Type Form A (N.O.) power relay
Contact Current Rating Resistive Load: 5 A @ 30 VDC, 250 VAC, 110 VAC
Breakdown Voltage 500 VAC
Relay On/Off Time 1500 ms (max.)
Initial Insulation Resistance 1000 mega-ohms (min.) @ 500 VDC
Mechanical Endurance 5,000,000 operations
Electrical Endurance 100,000 operations @ 5 A resistive load
Contact Resistance 100 milli-ohms (max.)
Pulse Output 0.3 Hz at rated load
• Power Requirements
Input Voltage 12 to 36 VDC
Input Current 188 mA @ 24 VDC
• MTBF (mean time between failures)
Time 808,744 hrs
Standard Telcordia SR332
Common Specifications
• LAN
Ethernet 2 switched 10/100 Mbps RJ45 ports
Protection 1.5 kV magnetic isolation
Protocols Modbus/TCP (Slave), EtherNet/IP*, SNMPv1/v2c, RESTful API, TCP/IP, UDP, DHCP, BOOTP, HTTP
• Physical Characteristics
Wiring I/O cable max. 14 AWG
Dimensions 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight Under 200 g (0.44 lb)
Mounting DIN rail or wall
• Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Altitude Up to 2000 m
Note Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Standards and Certifications
Safety UL 508
EMC EN 55032, EN 55024, EN 61000-3-2/3-3, EN 61000-6-2/6-4
EMI CISPR 32, FCC Part 15B Class A
EMS
  • IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
  • IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
  • IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
  • IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
  • IEC 61000-4-6 CS: 10 V
  • IEC 61000-4-8
Hazardous Location Class 1 Division 2, ATEX Zone 2
Green Product RoHS, CRoHS, WEEE