iologik-e1210-bo-chuyen-ethernet-mach-i-o-tu-xa-16-di-2-cong-ethernet-thiet-bi-smart-io-cong-nghiep-moxa-viet-nam-moxa-stc-viet-nam.png

Đại Diện Ủy Quyền Moxa Tại Việt Nam

Giới thiệu:

ioLogik E1210 Bộ chuyển mạch I/O từ xa 16 DI, 2 cổng Ethernet  của hãng Moxa-Taiwan hiện đang được Moxa Việt Nam phân phối rộng rãi tại thị trường Việt Nam. ioLogik E1210 được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh,…

Tính năng của sản phẩm :

  • User-definable Modbus/TCP Slave addressing
  • Supports EtherNet/IP adapter mode
  • Supports RESTful API for IIOT applications
  • 2-port Ethernet switch for daisy-chain topologies
  • Save time and wiring cost with peer-to-peer communications
  • Active communications with MX-AOPC UA Server
  • Supports SNMPv1/v2c
  • Easy mass deployment and configuration with ioSearch utility
  • Friendly configuration via web browser
  • Simplify I/O management with MXIO library on either a Windows or Linux platform
  • Class I Division 2, ATEX Zone 2 certification
  • Wide operating temperature range: -40 to 75°C (-40 to 167°F) 
Standards and Certifications
  • Safety UL 508
  • EMC EN 55032, EN 55024, EN 61000-3-2/3-3, EN 61000-6-2/6-4
  • EMI CISPR 32, FCC Part 15B Class A
  • EMS
    • IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
    • IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
    • IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
    • IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
    • IEC 61000-4-6 CS: 10 V
    • IEC 61000-4-8
  • Hazardous Location Class 1 Division 2, ATEX Zone 2
  • Green Product RoHS, CRoHS, WEEE
  • Note Please check Moxa’s website for the most up-to-date certification status.

 

Thông tin kỹ thuật của sản phẩm:
• Inputs and Outputs
Digital Inputs 16 channels
Isolation 3k VDC or 2k Vrms
• Digital Input
Sensor Type Wet Contact (NPN or PNP), Dry Contact
I/O Mode DI or Event Counter
Dry Contact • On: short to GND
• Off: open
Wet Contact (DI to COM) • On: 10 to 30 VDC 
• Off: 0 to 3 VDC
Common Type 8 points per COM
Counter Frequency 250 Hz
Digital Filtering Time Interval Software configurable
• Power Requirements
Input Voltage 12 to 36 VDC
Input Current 110 mA @ 24 VDC
• MTBF (mean time between failures)
Time 671,345 hrs
Standard Telcordia SR332
Common Specifications
• LAN
Ethernet 2 switched 10/100 Mbps RJ45 ports
Protection 1.5 kV magnetic isolation
Protocols Modbus/TCP (Slave), EtherNet/IP, SNMPv1/v2c, RESTful API, TCP/IP, UDP, DHCP, BOOTP, HTTP
• Physical Characteristics
Wiring I/O cable max. 14 AWG
Dimensions 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight Under 200 g (0.44 lb)
Mounting DIN rail or wall
• Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Altitude Up to 2000 m
Note Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Standards and Certifications
Safety UL 508
EMC EN 55032, EN 55024, EN 61000-3-2/3-3, EN 61000-6-2/6-4
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Hazardous Location Class 1 Division 2, ATEX Zone 2
Green Product RoHS, CRoHS, WEEE
Note Please check Moxa’s website for the most up-to-date certification status.