eyc-gs45-high-concentration-co2-transmitter-eyc-tech-viet-nam-stc-viet-nam.png

ĐẠI ĐIỆN EYC TECH TẠI VIỆT NAM

Công Ty TNHH TMDV Song Thành Công là Đại lý ủy quyền chính thức của hãng EYC TECH TẠI VIỆT NAM. Các sản phẩm tiêu biểu như Thiết bị đo lưu lượng, đo áp suất, độ ẩm, nhiệt độ, Hệ thống đo khí gas, CO, hệ thống đọc tín hiệu từ các thiết bị đo áp, nhiệt, lưu lượng, được dùng nhiều trong các ngành Năng lượng mặt trời, công nghiệp Điện gió, Điện tử, hàng hóa tiêu dùng, hệ thống HVAC, hệ thống xử lý nước, ngành sản xuất phi kim, nhà kính, thực phẩm và công nghệ sinh học, tòa nhà thông minh, tự động hóa...

eYc GS45 High-concentration CO2 Transmitter được EYC TECH Việt Nam đang phân phối rộng rãi tại thị trường Việt Nam. eYc GS45 được thiết kế theo tiêu chuẩn công nghiệp, dễ dàng kết nối với các hệ thống giám sát DCS, PLC, Mô đun I/O...Sản phẩm hiện đang được sử dụng để đo lường trong các lĩnh vực như: Dầu khí, Điện lực, Sân Bay, Năng Lượng mặt trời, quan trắc thời tiết, khí tượng thủy văn, giao thông-đô thị thông minh.

Tính năng chính:

eYc GS45 is a non-dispersive infra-red(NDIR)CO2 sensor module designed specifically for incubator application. With pigtail wire connections, the GS45 comes with internal and external mounting options.
The sensor module is powered with DC 12 V and it converts the measurement into a linear voltage signal(0 … 5 V corresponding to 0 … 20 vol.% CO2)or RS-485(Modbus communication corresponding to 0 … 30 vol.% CO2)
The GS45 also comes with simple maintenance features. The BC wiring connection allows the user to perform a quick background calibration(BC)(Sensor exposed to the fresh-air condition)

EYC TECH VIETNAM - YUDEN TECH VIETNAM - ĐẠI ĐIỆN EYC TECH TẠI VIỆT NAM - STC VIETNAM ĐẠI DIỆN ĐỘC QUYỀN CHÍNH THỨC CỦA HÃNG

Thông số kỹ thuật:

Sensing method:Non-dispersive infrared(NDIR)waveguide technology
Sampling method:Diffusion
Response time(T1/e):30 sec diffusion time
Measurement range:0 ... 20%vol.(0 ... 5 V)/ 0 ... 30%vol.(RS-485)
Digital resolution:0.01%vol
Repeatability:±0.1%vol.CO2±2% of measured value
Accuracy:±0.2%vol.CO2±3% of measured value
Pressure dependence:+1.6% reading per kPa deviation from normal pressure, 100 kPa
Calibration support:BC input to trigger background calibration at 400 PPM(0.04%vol)CO2
(Short circuit to G0 for at least 10 sec)(0 … 5V)/ Calibration by Modbus communication(RS-485)
Voltage output:0 ... 5 V corresponding to 0 ... 20 vol.% CO2
Output voltage resolution:5 mV or 0.03% CO2
Output load:≥10 kΩ
Communication interface:RS-485 Modbus communication
Storage temperature range:-40 ... +70°C(Non-condensing)
Sensor life expectancy:>15 years
Maintenance interval:Every 12 months
Self-diagnostics:Complete function check of the sensor module
Warm-up time:≤1 min
Conformance with the standards:Emission:EN61000-6-3:2001;Immunity:EN61000-6-2:2001;RoHS directive 2002 / 95 / EG
Conformance with standards:Mechanical shock test IEC 60068-2-27 Test Ea;Random vibration test IEC 60068-2-64 Test Fh Vibration immunity test severity:IEC TR 60721-4-5 table 5:IEC 60721-3-5, Class 5M3(3,6 gRMS)“Mechanical conditions in road vehicles in areas without well-developed road systems, light-weighted vehicles, tracked vehicles and self propelled machines, including installations in places which may be directly hit by flying stones”
Random vibration test severity:IED TR 60721-4-2 table 7:IEC 60721-3-2, Class 2M3(3,2 gRMS)“Transportation in lorries, trailers and all other kinds of transportation in areas without well-developed road systems, by trains with shock reducing buffers and by ships” IEC 60721-3-2, Class A(1,0 gRMS)“Instrumentation and automation equipment on ships”
Operating temperature range:-10 ... 50°C
Operating humidity range:0 ... 95%RH(Non-condensing)
Operating environment:Incubators, residential, commercial and industrial spaces.
Power input:DC 8 ... 18 V max rating, stabilized to within 10%(on board protection circuits)
Current consumption:40 mA average / <150 mA peak current(Averaged during IR lamp ON, 120 msec) / <250 mA peak power(During IR lamp start-up, the first 50 msec)
Electrical connections:4xAWG24 cable for power input(Red, Black)and voltage outputs(Blue)and background calibration(Yellow)
Dimensions:11x7x2.5 cm(Length)x(Width)x(Approximate Height);External dimensions

The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.